Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

Check the Software and Hardware Route Tables

To display the hardware host route table, use the show route forward-host ipv4 all command in L2/L3 operation mode.

admin@Switch> show route forward-host ipv4 all
Address HWaddress Port 
--------------- ----------------- ---------
10.10.3.2 48:6E:73:02:03:DA ge-1/1/48
Total host count:1

To display the hardware route table, use the show route forward-route ipv4 all command in L2/L3 operation mode.

admin@Switch> show route forward-route ipv4 all
Destination          NextHopMac          Port    
---------------      -----------------   ---------
10.10.3.0/24         48:6E:73:02:04:64   connected
101.101.101.0/24     48:6E:73:02:03:DA   ge-1/1/48
102.102.102.0/24     48:6E:73:02:03:DA   ge-1/1/48
Total route count:4

To display the software route table, use the show route table ipv4 unicast static command in L2/L3 operation mode.

admin@Switch> show route table ipv4 unicast static

If PicOS is running in OVS mode, check the software and hardware flow tables.

  • No labels