PicOS can be installed on bare metal switches listed in the Pica8 Hardware Compatibility list. A software license is needed to activate PicOS on the specific switch it is installed on.
- On N3048EP-ON and N3132PX switches, run "save_config" command when install license. Otherwise, the license key will be lost after PicOS reboot. For detail, please refer to Configuration Saving Guide.
- Starting with PicOS 2.4, only the first 4 ports of the switch can be used if no license is installed. The first four ports should enable any protocol whether license has or has not been installed. This is also the perfect way to test PicOS without buying a full license. Without a license installed installed, only the first 4 physical ports can be used, not logical ports.
Licenses for switches can be downloaded from the License Portal.
The following terms are used throughout this section:
- Base License: This license is required on any switch.
- Bundle: This license includes all PicOS features. That is, it bundles all three licenses.
- Evaluation License: There is no evaluation license because users can evaluate PicOS without a license. Please note that only the first four switch ports (and the management port) are active without a license.
- Hardware ID: Hardware ID is needed when users download a license. Users can view their own switch ID by executing the license show command license -s.
- Mode: There are two license modes: switch license and site license.
- Type: There are two speed types: 1G and 10G.
PicOS License Types
Pica8 PicOS has a multi-tier licensing model, which enables users to install only the needed features or all the features provided by PicOS. Each license contains unique features.
The PicOS license types are:
The following features are available with the Base license:
- Network Linux
- Layer 2 (STP/RSTP/MSTP, LLDP, LACP, IGMP-Snooping, dot1x, sFlow, UDLD)
- Multi-chassis Link Aggregation (MLAG)
- Simple Network Management Protocol (SNMP)
- Zero Touch Provisioning (ZTP)
- Static Routes
Layer 3 License
The following features are available with the Layer3 license:
- Open Shortest Path First (OSPF)
- Border Gateway Protocol (BGP)
- Protocol-Independent Multicast (PIM)
- Network Address Translation (NAT)
- Virtual Extensible LAN (VXLAN)
- VRRP (Virtual Router Redundancy Protocol)
The following features are available with the OpenFlow license:
- Open vSwitch Database Management Protocol (OVSDB)
- OpenFlow Releases 1.3 and 1.4
- Multi Protocol Label Switching (MPLS)
- Virtual Extensible LAN (VXLAN)
Base, Layer 3, and OpenFlow License
This license bundles all the PicOS features into one license.
There are two speeds available for each license.
- 1GE: Platform with 48 x 1GE OR 48 x 1GE + 4 x 10GE ports
- 10GE: Platform with 48 x 10GE + 4 x 40GE OR 48 x 10GE + 6 x 40GE OR 32 x 40GE ports
- Switch: Use this to install a license on a single switch only.
- Site: Use this to install the same license on all switches at a site.
Accessing Hardware ID
User must have the hardware ID available to download a license. A utility generates hardware ID using the license -s command in PicOS OVS mode.
Installing the License
If user updates the switch from a previous version of PicOS to PicOS 2.4 without a license installed, only the first 4 ports of the switch will be available after the upgrade. To upgrade the switch without production impact, user should install a license before the upgrade.
It is possible to install a license in PicOS 2.3 (starting with PicOS 2.3.3).
To upgrade a switch from a PicOS version earlier than 2.3, it may be necessary to upgrade to PicOS 2.3 first to install a license on the system. To avoid this step, user can run a script that can install the license on PicOS releases earlier than 2.3. Please contact Pica8 support or look at the section below for older PicOS releases.
The license file cannot name pica.lic, or license will install failed.
Customers can download the generated license file and copy it to the /etc/picos/ directory.
The following example shows the contents of a switch-based license file:
In the license file shown above, the type is 1GE while the feature is Base Product, Layer3, and Open Flow. Hardware ID is unique to every switch.
The switch cannot upgrade to a PicOS version whose build date is later than the license expiration date.
The following example shows the contents of a site-based license file:
The license file can be installed with the command-line utility called license with the -i option. The following example installs a license file named js.lic:
If the license is installed successfully, after license -i command, the following message will be displayed:
License successfully added, the switch need to be rebooted to activate the license.
To activate the new license, the switch must be restarted.
Troubleshooting License Installation
User may encounter various problems during license installation as detailed below.
- The public.key file cannot be found.
- The license file does not exist.
- The header or the key is disrupted.
- The license format is not valid.
- The license file is not compatible with the switch (verify failed).
Displaying License Information
User can display the license information using the license -s command at the Linux shell.
The following example displays information about the switch-based license:
The following example displays information about the site-based license:
If the license is not valid, the license -s command generates the following output:
If no license is installed, the license -s command generates the following output:
Removing a License
User can use the license -r command at the Linux shell to remove a license as detailed below:
If the license is modified or removed, the switch must be rebooted for the change to be effective.
License Update on Older Releases
To upgrade a switch to PicOS 2.4 from a version earlier than 2.3, it may be necessary to upgrade to PicOS 2.3 first and install a license on the system. To avoid this extra step, user can install a new script on PicOS releases prior to 2.3 and use the script to install a license.
This new script supports the PicOS releases 2.1, 2.2, and 2.3. User has to follow the following steps to install a license using the script:
- Download the file named license-powerpc.bin or license-powerpcspe.bin according to the switch model. For example, download the file license-powerpc.bin for the Pica8 P-3290 switch.
- Run the command ./license-powerpc -s to display the hardware ID.
- Copy the upgrade.sh script from https://github.com/Pica8/Upgrade to the switch.
- Copy the license tool from http://www.pica8.com/portal/standard/ to the switch. The tool can be used to install a license on PicOS 2.3 or earlier but the license will only become effective after upgrading to PicOS 2.4 or later.
The Pica8 P-3290 and P-3295 use the license-powerpc file. All other PicOS switches use the license-powerpcspe file.
The following example describes how to upgrade a Pica8 P-3297 switch from PicOS 2.3.
Step 1: Check the version of PicOS using the version command at the Linux shell.
Step 2: Copy license tool:
Step 3: Copy public.key, license.conf and license to /etc/picos:
Step 4: Install license:
Add License Directly From License Command
User can also add the license directly from the license command. The PicOS 2.6 image supports this command.
Step 1: Paste the license content.
Step 2: Press enter and then press crtl+d.
Example for P5401, add a site license:
Reboot system and license can be activated.