Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

The set firewall filter copp sequence from destination-address-ipv4 command configures a firewall filter rule based on the destination IPv4 address for traffic classification.


Command Syntax

set firewall filter copp sequence <number> from destination-address-ipv4 <ipv4-address>


Parameter

Parameter

Description

sequence <number>

Specifies filter sequence number. The value is an integer that ranges from 0 to 9999.

The 15 integers 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150 are not allowed to be used for sequence numbers in user-defined CoPP firewall filter rules.

destination-address-ipv4 < ipv4-address>

Specifies destination IP, it could be a specific IPv4 address or an IPv4 subnet. For example, 192.168.1.10, 10.1.1.0/24.

 

Usage Guidelines

You can run the set firewall filter copp sequence from destination-address-ipv4 command to configure a firewall filter rule based on the destination IPv4 address for traffic classification so that the device processes packets matching the same firewall filter rule in the same manner.

 

Example

• Configure a firewall filter rule based on the destination IPv4 address of 10.1.1.0/24.

admin@XorPlus# set firewall filter copp sequence 51 from destination-address-ipv4 10.1.1.0/24
admin@XorPlus# commit
  • No labels