Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

The set firewall filter copp sequence from destination-mac-address command configures a firewall filter rule based on the destination MAC address for traffic classification.


Command Syntax

set firewall filter copp sequence <number> from destination-mac-address <mac-address>


Parameter

Parameter

Description

sequence <number>

Specifies filter sequence number. The value is an integer that ranges from 0 to 9999.

The 15 integers 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150 are not allowed to be used for sequence numbers in user-defined CoPP firewall filter rules.

destination-mac-address <mac-address>

Specifies the destination MAC address.

The value is in the format of H:H:H:H:H:H. An H contains 2 hexadecimal numbers.

 

Usage Guidelines

You can run the set firewall filter copp sequence from destination-mac-address command to configure a firewall filter rule based on the destination MAC address for traffic classification so that the device processes packets matching the same firewall filter rule in the same manner.

 

Example

• Configure a firewall filter rule based on the destination MAC address of 00:50:ba:27:be:d2.

admin@XorPlus# set firewall filter copp sequence 51 from destination-mac-address 00:50:ba:27:be:d2
admin@XorPlus# commit
  • No labels