Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

NOTE:

Enable IP routing function before using this feature, for details please refer to Configuring IP Routing.

In L2/L3, RIPv2 is supported. A policy statement is used to specify which route entry will be distributed. For example, static route or the connected route can be distributed to a neighbor. Also, the distributed route metric can be specified. The RIPv2 interface parameters (accept-default-route, advertise-default-route, deletion-delay, request-interval, update-interval) can be configured.

admin@XorPlus# set vlans vlan-id 2
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching native-vlan-id 2
admin@XorPlus# set vlans vlan-id 2 l3-interface vlan-2
admin@XorPlus# set vlan-interface interface vlan-2 vif vlan-2 address 192.168.1.1 prefix-length 24
admin@XorPlus# commit
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus# set vlans vlan-id 3
admin@XorPlus# set vlans vlan-id 3 l3-interface vlan-3
admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching native-vlan-id 3
admin@XorPlus# set vlan-interface interface vlan-3 vif vlan-3 address 192.168.2.1 prefix-length 24
admin@XorPlus# set protocols static route 9.9.9.0/24 next-hop 192.168.2.2
admin@XorPlus# commit
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus# set policy policy-statement connected-to-rip term export from protocol connected
admin@XorPlus# set policy policy-statement connected-to-rip term export then metric 0
admin@XorPlus# set policy policy-statement static-to-rip term export from protocol static
admin@XorPlus# set policy policy-statement static-to-rip term export then metric 1
admin@XorPlus# commit
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus# set protocols rip interface vlan-2 vif vlan-2 address 192.168.1.1
admin@XorPlus# set protocols rip export "connected-to-rip,static-to-rip"
admin@XorPlus# commit
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus# 


You can verify the RIP configuration:

admin@XorPlus# run show rip status all
 * RIP on vlan-2vlan-2 192.168.1.1
  Status: enabled
admin@XorPlus#
admin@XorPlus# run show rip statistics all
 * RIP on vlan-2vlan-2 192.168.1.1
  Status: enabled
   Counter                                     Value
  -------------------------------- ----------------
  Requests Sent                                   7
  Updates Sent                                    6
  Triggered Updates Sent                          1
  Non-RIP Updates Sent                            0
  Total Packets Received                          0
  Request Packets Received                        0
  Update Packets Received                         0
  Bad Packets Received                            0
  Authentication Failures                         0
  Bad Routes Received                             0
  Non-RIP Requests Received                       0
                                                                • 0
  • No labels