Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

The set system aaa tacacs-plus source-interface command sets the source interface the switch uses to connect to the TACAS+ server.


Command Syntax

set system aaa tacacs-plus source-interface <interface-name>


Parameter

Parameter

Description

interface <interface-name>

Specifies the source interface. The value could be an L3 VLAN interface that enabled inband management, or eth0, or loopback interface. By default, the source interface is eth0.


Usage Guidelines

NOTE:

  • When using a L3 VLAN interface as a source interface connecting to the TACAS+ server, you have to enable inband management function by using command set system inband enable true.
  • Remember to specify an IP address for the source interface.


Example

  • Set the source interface the switch uses to connect to the server to loopback interface.
admin@Xorplus#set vlan-interface loopback address 10.1.1.1 prefix-length 32
admin@Xorplus# set system aaa tacacs-plus source-interface loopback
  • Set the source interface the switch uses to connect to the server to L3 VLAN interface.
admin@Xorplus# set interface gigabit-ethernet ge-1/1/23 family ethernet-switching native-vlan-id 100
admin@Xorplus# set vlan-interface interface vlan100 vif vlan100 address 10.10.51.129 prefix-length 24
admin@Xorplus# set vlans vlan-id 100 l3-interface vlan100
admin@Xorplus# set system inband enable true
admin@Xorplus# set system aaa tacacs-plus source-interface vlan100


  • No labels