Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

The traceroute6 command is used to check the route of packets when travelling from the source to the destination. When the network fails, the user can use this command to troubleshooting the fault point.


Command Syntax

  •   From the ">" prompt, use the following format,

traceroute6 <ipv6-address> [vrf <vrf-name>]

  •   From the "#" prompt, add run in front of the command,

run traceroute6 <ipv6-address> [vrf <vrf-name>]


Parameter

Parameter

Description

<ipv6-address>

Specifies the domain name or IPv6 address of the destination host.

vrf <vrf-name>

Optional. Specifies a VRF name. The value is a string.

  •   When a VRF name is specified, find the next hop routing information from the specified VRF domain.
  •   When no VRF is specified, find the next hop routing information from the default VRF.


Example

  •   Traceroute the gateways for the host with the IP address fc00::3.
admin@Xorplus> traceroute6 fc00::3
traceroute to fc00::3 (fc00::3), 30 hops max, 60 byte packets
 1  bogon (FC00:1::3)  15 ms  20 ms  30 ms
 2  bogon (FC00::3)  1901 ms  1207 ms  3020 ms
  • No labels