Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

To configure the MD5 key to authenticate RIP packets, use the set protocols rip interface vif address authentication md5 password command in L2/L3 configuration mode.

Command Syntax

set protocols rip interface interface-name vif vif-name address ip-address authentication md5 key-id password key

Parameters

interface-nameInterface name.
vif-nameVirtual interface name.
ip-addressVirtual interface IP address used for RIP.
key-idThe MD5 authentication key identifier. The range is 0-255.
keyThe alphanumeric key for MD5 authentication of RIP packets.

Example

This example configures the MD5 key to authenticate RIP packets:

admin@Switch# set protocols rip interface vlan10 vif vlan10 address 10.1.1.1 authentication md5 1 password pica8
  • No labels