Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

To configure the minimum delay between outbound RIP packets, use the set protocols rip interface vif address interpacket-delay command in L2/L3 configuration mode.

Command Syntax

set protocols rip interface interface-name vif vif-name address ip-address interpacket-delay time

Parameters

interface-nameInterface name
vif-nameVirtual interface name.
ip-addressVirtual interface IP address for RIP.
timeMinimum delay between outbound RIP packets, in ms (milliseconds).

Example

This example configures 10 ms as the minimum delay between outbound RIP packets:

admin@Switch# set protocols rip interface vlan10 vif vlan10 address 10.1.1.1 interpacket-delay 10
  • No labels