Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

To configure the route expiration time of the switch, use the set protocols rip interface vif address route-timeout command in L2/L3 configuration mode.

Command Syntax

set protocols rip interface interface-name vif vif-name address ip-address route-timeout time

Parameters

interface-nameInterface name.
vif-nameVirtual interface name.
ip-addressVirtual interface IP address used for RIP.
timeRoute timeout in seconds. The range is 60-360.

Example

This example configures 80 seconds as the route expiration time of the switch:

admin@LEAF-A# set protocols rip interface vlan100 vif vlan100 address 10.1.1.1 route-timeout 80
  • No labels