Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

To configure the delay before sending repeated triggered updates, use the set protocols rip interface vif address triggered-delay command in L2/L3 configuration mode.

Command Syntax

set protocols rip interface interface-name vif vif-name address ip-address triggered-delay time

Parameters

interface-nameInterface name.
vif-nameVirtual interface name.
ip-addressVirtual interface IP address for RIP.
timeTrigger delay time in seconds. The range is 1-180.

Example

The following example configures 10 seconds as the delay before sending repeated triggered update:

admin@Switch$set protocols rip interface vlan10 vif vlan10 address 10.1.1.1 triggered-delay 10
  • No labels