Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

To configure the interval between regular RIP updates, use the set protocols rip interface vif address update-interval command in L2/L3 configuration mode.

Command Syntax

set protocols rip interface interface-name vif vif-name address ip-address update-interval time

Parameters

interface-nameInterface name.
vif-nameVirtual interface name.
ip-addressVirtual interface IP address for RIP.
timeRIP update interval in seconds. The range is 10-60.

Example

The following example sets the RIP update interval to 10 seconds:

admin@Switch# set protocols rip interface vlan10 vif vlan10 address 10.1.1.1 update-interval 10
  • No labels