Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

To configure jitter for regular RIP update interval, use the set protocols rip interface vif address update-jitter in L2/L3 configuration mode.

Command Syntax

set protocols rip interface interface-name vif vif-name adress ip-address update-jitter percent

Parameters

interface-nameInterface name.
vif-nameVirtual interface name.
ip-addressVirtual interface IP address used for RIP.
percentJitter as a percentage of RIP update-interval. The range is 0-100.

Example

The following example configures jitter as 10 percent of the RIP update-interval:

admin@Switch# set protocols rip interface vlan10 vif vlan10 address 10.1.1.1 update-jitter 10
  • No labels