Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

The run show pim mrib command shows information about the Multicast Routing Information Base (MRIB) that is used by PIM.


Command Syntax

run show pim mrib


Parameter

None.


Example

  • Show the information about the Multicast Routing Information Base (MRIB) that is used by PIM.
admin@Xorplus# run show pim mrib
DestPrefix         NextHopRouter   VifName   VifIndex   MetricPref   Metric
----------------   -------------   -------   --------   ----------   ------
1.1.1.1/32         1.1.1.1         loopback  0          0            0    
2.2.2.2/32         20.0.0.2        vlan20    1          110          1    
3.3.3.3/32         60.0.0.3        vlan60    2          110          1    
20.0.0.0/24        20.0.0.1        vlan20    1          0            0

 Table 1 Description of the run show pim mrib command output

Item

Description

DestPrefix

The destination prefix address.

NextHopRouter

The address of the next-hop router toward the destination.

VifName

The name of the vif interface toward the destination.

VifIndex

The vif interface index of the vif interface toward the destination.

MetricPref

The metric preference of the entry.

Metric

The routing metric of the entry.

  • No labels