Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

To configure the maximum time drift for the MD5 authentication key of an interface, use the set protocols ospf4 area interface vif address authentication md5 max-time-drift command in L2/L3 configuration mode.

Command Syntax

set protocols ospf4 vrf vrf-name area area-id interface interface-name vif vif-name address ip-address authentication md5 key-id max-time-drift time

Parameters

vrf-name

Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

Note that: The configuration is in the default VRF if not explicitly bound to any VRF.

area-idOSPF area identifier.
interface-nameInterface name.
vif-nameVirtual interface name.
ip-addressVirtual interface IP address, used for OSPF.
key-idMD5 authentication key identifier. The range is 0-255.
timeThe maximum time drift among all routers, in seconds. The range is 0-65535. For maximum time drift, use 65535.

Example

This example configure the maximum time drift of the OSPF interface MD5 authentication as 20 seconds.

admin@XorPlus# set protocols ospf4 area 0.0.0.0 interface vlan2 vif vlan2 address 10.2.2.1 authentication md5 1 max-time-drift 20
  • No labels