Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

To configure the key used for MD5 authentiction of OSPF packets, use the set protocols ospf4 area interface vif address authentication md5 password command in L2/L3 configuration mode. 

Command Syntax

set protocols ospf4 vrf vrf-name area area-id interface interface-name vif vif-name address ip-address authentication md5 key-id password key

 Parameters 

vrf-name

Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

Note that: The configuration is in the default VRF if not explicitly bound to any VRF.

area-idOSPF area identifier.
interface-nameInterface name.
vif-nameVirtual interface name.
ip-addressVirtual interface IP address used for OSPF.
key-idMD5 authentication key identifier. The range is 0-255.
keyMD5 authentication key.

Example

This example sets the key used for MD5 authentication of OSPF packets to pica8.

admin@Switch# set protocols ospf4 area 0.0.0.0 interface vlan2 vif vlan2 address 10.2.2.1 authentication md5 1 password pica8
  • No labels