Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

To configure the cost of an OSPF interface, use the set protocols ospf4 area interface vif address interface-cost command in L2/L3 configuration mode.

Command Syntax

set protocols ospf4 vrf vrf-name area area-id interface interface-name vif vif-name address ip-address interface-cost cost



Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

Note that: The configuration is in the default VRF if not explicitly bound to any VRF.

area-idOSPF area identifier. Use the dotted decimal notation. For exmaple, use for area 0.
interface-nameInterface name.
vif-nameVirtual interface name.
ip-addressVirtual interface IP address used for OSPF.
costOSPF cost. The range is 1-65,535.


The following example sets the interface cost for address to 3:

admin@Switch# set protocols ospf4 area interface vlan2 vif vlan2 address interface-cost 3
  • No labels