Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

To make OSPF advertise host route, use the set protocols ospf4 area interface vif address passive host in L2/L3 configuration mode.

Command Syntax

set protocols ospf4 vrf vrf-name area area-id interface interface-name vif vif-name address ip-address passive host { true | false }



Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

Note that: The configuration is in the default VRF if not explicitly bound to any VRF.

area-idOSPF area identifier. Use dotted decimal notation. For example, use for area 0.
interface-nameInterface name
vif-nameVirtual interface name.
ip-addressVirtual interface IP address.
trueAdvertise host route.
falseDo not advertise host route.


The following example makes the OSPF interface advertise host route:

admin@Switch# set protocols ospf4 area interface vlan2 vif vlan2 address passive host true
  • No labels