Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

To set the estimated time needed to send an OSPF LSA update packet, use the set protocols ospf4 area interface vif address transmit-delay command in L2/L3 configuration mode. OSPF increments the LSA age by the transmit delay amount before transmitting the LSA update.

Command Syntax

set protocols ospf4 vrf vrf-name area area-id interface interface-name vif vif-name address ip-address transmit-delay time

Parameters

vrf-name

Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

Note that: The configuration is in the default VRF if not explicitly bound to any VRF.

area-idOSPF area identifier.
interface-nameInterface name.
vif-nameVirtual interface name.
ip-addressVirtual interface IP address used for OSPF.
timeOSPF transmit delay in seconds. The range is 1-3600.

Example

This example sets the OSPF transmist delay to 2 seconds.

admin@Switch# set protocols ospf4 area 0.0.0.0 interface vlan2 vif vlan2 address 10.2.2.1 transmit-delay 2
  • No labels