Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

To enable OSPFv3 on an IP address, use the set protocols ospf6 area interface vif address disable command in L2/L3 configuration mode.

Command Syntax

set protocols ospf6 vrf vrf-name area area-id interface interface-name vif vif-name address ip-address disable { true | false }

Parameters

vrf-name

Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

Note that: The configuration is in the default VRF if not explicitly bound to any VRF.

area-idOSPFv3 area identifier for the area to which the attached network belongs.
interface-nameInterface name.
vif-nameVirtual interface name.
ip-addressVirtual interface IPv6 address.
trueDisable OSPFv6.
falseEnable OSPFv6.

Example

The following example configures OSPF for an IPv6 address.

admin@Switch# set protocols ospf6 area 0.0.0.0 interface vlan1 vif vlan1 address 2001::1 disable false
  • No labels