Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

To configure the OSPFv3 hello interval on an interface, use the set protocols ospf6 area interface vif hello-interval command in L2/L3 configuration mode.

Command Syntax

set protocols ospf6 vrf vrf-name area area-id interface interface-name vif name hello-interval time

Parameters

vrf-name

Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

Note that: The configuration is in the default VRF if not explicitly bound to any VRF.

area-idThe OSPF area to which the attached network belongs.
interface-nameInterface name to be included in the OSPFv3 area specified by area-id.
nameVirtual interface name.
timeThe time between two consecutive Hello messaged. The range is 1-65535.

Example

The following example configures an OSPFv3 hello interval of 20 seconds on the vlan2000 interface:

admin@XorPlus# set protocols ospf6 area 0.0.0.0 interface vlan2000 vif vlan2000 hello-interval 20
  • No labels