Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

To set the estimated time needed to send an OSPFv3 LSA update packet, use the set protocols ospf6 area interface vif transmit-delay command in L2/L3 configuration mode.

Command Syntax

set protocols ospf6 vrf vrf-name area area-id interface interface-name vif vif-name transmit-delay time

Parameters

vrf-name

Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

Note that: The configuration is in the default VRF if not explicitly bound to any VRF.

area-idOSPFv3 area identifier.
interface-nameInterface name.
vif-nameVirtual interface name.
timeThe estimated time to send and LSA to a neighbor. The range is 0-3600.

Example

The following example configures OSPFv3 transmit delay to 2 seconds:

admin@Switch# set protocols ospf6 area 0.0.0.0 interface vlan2 vif vlan2 transmit-delay 2
  • No labels