Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

The set protocols pimsm4 switch-to-spt-threshold interval command is used to set the measurement interval for measuring the rate for of traffic from a multicast sender before the switchover from the RPT to the SPT.

By default, the system performs SPT switchover on receiving the first multicast data packet through the RPT.


Command Syntax

set protocols pimsm4 switch-to-spt-threshold interval <value>


Parameter

Parameter

Description

interval <value>

Specifies the measurement interval for measuring the rate for of traffic from a multicast sender before the switchover from the RPT to the SPT.

The value is an integer that ranges from 3 to 2147483647, in seconds.


Usage Guidelines

Before running this command, you must set the threshold for SPT switchover by using the set protocols pimsm4 switch-to-spt-threshold bytes command; otherwise, the set protocols pimsm4 switch-to-spt-threshold interval command takes no effect.


Example

  • Configure the interval for measuring the rate for of traffic from a multicast sender before the switchover from the RPT to the SPT to 20s.
admin@Xorplus# set protocols pimsm4 switch-to-spt-threshold interval 20
admin@Xorplus# commit
  • No labels