To configure a filter sequence to match packets with specified destination IPv6 address, use the set firewall filter sequence from source-address-ipv6 command in L2/L3 configuration mode. To remove the condition, use the delete form of the command.
set firewall filter filter-name sequence number from source-address-ipv6 address/prefix-length
delete firewall filter filter-name sequence number from source-address-ipv6
|number||Filter sequence number. The range is 0-9999.|
|address/prefix-length||IPv6 address / prefix length.|
The following example configures sequence 2 of the MyFilter filter to match packets with source IPv6 address is 2001::1:
The following example removes the match condition from sequence 2 of the MyFilter filter: