Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

·System LED Definition:

LabelConditionDescription


PS1

(Power Supply Status)

GreenThis power is operating normally.
AmberPWR present but not power on or this power is fault.
OffPower supply not present.


PS2

(Power Supply Status)
GreenThis power is operating normally.
AmberPWR present but not power on or this power is fault.
OffPower supply not present.
DiagGreenSystem self-diagnostic test successfully completed.
AmberSystem self-diagnostic test has detected a fault. (Fan, thermal or any interface fault.)


FAN

GreenSystem FAN operating normally.
AmberFan tray present buy system FAN is fault.
OFFSystem OFF

LOC

Not supported.


·port LED Definition:

LEDConditionStatus



1~48 Port LED

On/Flashing

Green

Port has a valid link at 10G.

Flashing indicates activity.

On/Flashing

Amber

Port has a valid link at 1G/100M.

Flashing indicates activity.

OffThere is no link on the port.

QSFP+ Port LED in 40G

Mode

(Port 49~ 54)

On/Flashing

Green

SFP+ port has a valid link at 40G.

Flashing indicates activity.

OffThere is no link on the port.

QSFP+ Port LED in 10G

Mode

(With Breakout cable)

On/Flashing

Green

QSFP port has a valid link at 10G via break out

cable. The LED on 40G QSFP end is also present

OFF. Flashing indicates activity.

OffThere is no link on the port.
OOB LED (Link)OnPort has a valid link
OffThere is no link on the port
OOB LED (Activity)FlashingFlashing indicates activity
OffThere is no link on the port
  • Single-color LED will be used for 40G QSFP+ uplink port to indicate link/activity.
  • There should be four LEDs per QSFP port. These LEDs can represent state of 40GE port or 4 10GE ports when used in breakout mode.
  • The 40G QSFP+ LED should present OFF while there’s breakout cable plugged in.
  • No labels