Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

·System LED Definition:

LabelConditionDescription


PS1

(Power Supply Status)

GreenThis power is operating normally.
AmberPWR present but not power on or this power is fault.
OffPower supply not present.


PS2

(Power Supply Status)
GreenThis power is operating normally.
AmberPWR present but not power on or this power is fault.
OffPower supply not present.
DiagGreenSystem self-diagnostic test successfully completed.
AmberSystem self-diagnostic test has detected a fault. (Fan, thermal or any interface fault.)


FAN

GreenSystem FAN operating normally.
AmberFan tray present buy system FAN is fault.
OFFSystem OFF

LOC

Not supported.


·port LED Definition:

LEDConditionStatus



SFP+ Port LED

On/Flashing

Green

SFP+ port has a valid link at 10G.

Flashing indicates activity.

On/Flashing

Amber

SFP+ port has a valid link at 1G.

Flashing indicates activity.

OffThere is no link on the port.

QSFP28 Port LED in 100G

Mode

(Port 49~ 54)

On/Flashing

Green

QSFP port has a valid link at 100G.

Flashing indicates activity.

OffThere is no link on the port.

QSFP28 Port LED in 25G

Mode

(With Breakout cable)

On/Flashing

Amber

QSFP28 port has a valid link at 25G via break out

cable. The LED on 100G QSFP end is also present

OFF. Flashing indicates activity.

OffThere is no link on the port.

QSFP28 Port LED in 40G

Mode

(Port 49~ 54)

On/Flashing

blue

QSFP port has a valid link at 100G.

Flashing indicates activity.

OffThere is no link on the port.

QSFP28 Port LED in 10G

Mode

(With Breakout cable)

On/Flashing

purple

QSFP28 port has a valid link at 10G via break out

cable. The LED on 40G QSFP end is also present

OFF. Flashing indicates activity.

OffThere is no link on the port.
OOB LED (Link)OnPort has a valid link
OffThere is no link on the port
OOB LED (Activity)FlashingFlashing indicates activity
OffThere is no link on the port
  • Single-color LED will be used for 10G SFP+ and 40/100G QSFP28 uplink port to
    indicate link/activity.
  • There should be four LEDs per QSFP28 port. These LEDs can represent state of
    40/100GE port or 4 10/25GE ports when used in breakout mode.
  • The 40/100G QSFP28 LED should present OFF while there’s breakout cable plugged
    in.


  • No labels