Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

To configure the start time (and date) for MD5 authentication of RIP packets, use the set protocols rip interface vif address authentication md5 start-time command in L2/L3 configuration mode.

Command Syntax

set protocols rip interface interface-name vif vif-name address ip-address authentication md5 key-id start-time time


interface-nameInterface name.
vif-nameVirtual interface name.
ip-addressVirtual interface IP address for RIP.
key-idMD5 authentication key identifier. The range is 0-255.
timeAuthentication start time (and date). The format to be used is YYYY-MM-DD.HH:MM.


This example configures the start time (and date) for MD5 authentication of RIP packets:

admin@Switch# set protocols rip interface vlan10 vif vlan10 address authentication md5 1 start-time 2014-3-31.21:21
  • No labels