Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

To configure the password for simple authentication of RIP packets, use the set protocols rip interface vif address authentication simple-password command in L2/L3 configuration mode.

Command Syntax

set protocols rip interface interface-name vif vif-name address ip-address authentication simple-password password

Parameters

interface-nameInterface name.
vif-nameVirtual interface name.
ip-addressVirtual interface IP address for RIP.
passwordPassword for simple authentication.

Example

This example configures a password for simple authentication of RIP packets:

admin@Switch# set protocols rip interface vlan10 vif vlan10 address 10.1.1.1 authentication simple-password pica8
  • No labels