Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

To set the horizon type applied to announced routes, use the set protocols rip interface vif address horizon in L2/L3 configuration mode.

Command Syntax

set protocols rip interface interface-name vif vif-name address ip-address horizon { none | split-horizon | split-horizon-poison-reverse }

Parameters

interface-nameInterface name.
vif-nameVirtual interface name.
ip-addressInterface IP address used for RIP.
noneNo horizon type.
split-horizonSplit horizon.
split-horizon-poison-reverseSplit horizon with poison reverse.

Example

The following example sets the horizon type applied to announced routes to none:

admin@Switch# set protocols rip interface vlan10 vif vlan10 address 10.1.1.1 horizon none
  • No labels