To configure a filter sequence to match packets with the specified source port, use the set firewall filter sequence from source-port command in L2/L3 configuration mode. To remove the match condition from the filter sequence, use the delete form of the command.
set firewall filter filter-name sequence number from source-port port-number
delete firewall filter filter-name sequence number from source-port
|number||Filter sequence number. The range is 0-9999.|
|port-number||Source port number. The range is 0-65535.|
The following example configures sequence 2 of the MyFilter filter to match packets with source port in the 100-234 range:
The following example removes the souce-port match condition from sequence 2 of the MyFilter filter: