Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

The set interface gigabit-ethernet rate-limiting egress ratio command sets a rate limit value on a port for the egress traffic in percentage.


In the same direction of the same interface, kilobits and ratio cannot be configured simultaneously.

Command Syntax

set interface gigabit-ethernet <interface-name> rate-limiting egress ratio <value>




interface <interface-name>

Specifies an interface name. The value is a string.

ratio <value>

Specifies the rate limit value in percentage of the interface rate. The value is an integer that ranges from 0 to 100.

When the value is configured to 0, it indicates no rate limit on the interface.


  •   Set the rate limit value to 10% of the interface rate on ge-1/1/1 for the egress traffic.
admin@Xorplus# set interface gigabit-ethernet ge-1/1/1 rate-limiting egress ratio 10
admin@Xorplus# commit
  • No labels