Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

To configure the deadline of an MD5 authentiction key for OSPF packets, use the set protocols ospf4 area interface vif address authentication md5 end-time command in L2/L3 configuration mode.

Command Syntax

set protocols ospf4 vrf vrf-name area area-id interface interface-name vif vif-name address ip-address authentication md5 key-id end-time time



Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

Note that: The configuration is in the default VRF if not explicitly bound to any VRF.

area-idOSPF area identifier.
interface-nameInterface name.
vif-nameVirtual interface name.

Virtual interface IP address used for OSPF.

key-idMD5 authentication key identifier. The range is 0-255.
timeExpiry time for the MD5 authentication key. The format is YYYY-MM-DD.HH:MM.


This example configures the end time for MD5 authentication of OSPF packets using the key ID 1.

admin@Switch# set protocols ospf4 area interface vlan2 vif vlan2 address authentication md5 1 end-time 2015-10-18.23:24
  • No labels