Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
To enable OSPFv3 on an IP address, use the set protocols ospf6 area interface vif address disable command in L2/L3 configuration mode.
Command Syntax
set protocols ospf6 vrf vrf-name area area-id interface interface-name vif vif-name address ip-address disable { true | false }
Parameters
| vrf-name | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. Note that: The configuration is in the default VRF if not explicitly bound to any VRF. |
| area-id | OSPFv3 area identifier for the area to which the attached network belongs. |
| interface-name | Interface name. |
| vif-name | Virtual interface name. |
| ip-address | Virtual interface IPv6 address. |
| true | Disable OSPFv6. |
| false | Enable OSPFv6. |
Example
The following example configures OSPF for an IPv6 address.
admin@Switch# set protocols ospf6 area 0.0.0.0 interface vlan1 vif vlan1 address 2001::1 disable false