Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

To configure BFD (Bidirectional Forwarding Detection) on the OSPFv3 interface, use the set protocols ospf6 area interface vif bfd disable command in L2/L3 configuration mode. 

Command Syntax

set protocols ospf6 vrf vrf-name area area-id interface interface-name vif vif-name bfd disable { true | false }



Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

Note that: The configuration is in the default VRF if not explicitly bound to any VRF.

area-idOSPFv6 area identifier.
interface-nameInterface name.
vif-nameVirtual interface name.
trueDIsable BFD.
falseEnable BFD.


The following example configures BFD on an OSPFv3 interface:

admin@Switch# set protocols ospf6 area interface vlan2 vif vlan2 bfd disable false
  • No labels