Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

To configure the cost of an OSPFv6 interface, use the set protocols ospf6 area interface vif interface-cost command in L2/L3 configuration mode.

Command Syntax

set protocols ospf6 vrf vrf-name area area-id interface interface-name vif vif-name interface-cost cost



Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

Note that: The configuration is in the default VRF if not explicitly bound to any VRF.

area-idOSPFv3 area identifier.
interface-nameInterface name.
vif-nameVirtual interface name.
costOSPFv3 cost. The range is 1-65535.


The following example configures the OSPFv3 cost of vlan2 interface as 3:

admin@Switch# set protocols ospf6 area interface vlan2 vif vlan2 interface-cost 3
  • No labels