Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

To specify the time between LSA (link-state advertisement) retransmissions for adjacencies belonging to the interface, use the set protocols ospf6 area interface vif retransmit-interval command in L2/L3 configuration mode.

Command Syntax

set protocols ospf6 vrf vrf-name area area-id interface interface-name vif vif-name retransmit-interval time



Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

Note that: The configuration is in the default VRF if not explicitly bound to any VRF.

area-idOSPFv6 area identifier.
interface-nameInterface name.
vif-nameVirtual interface name.
timeThe retransmit interval in seconds. The rangeis 1-65535.


The following example sets the retransmit interval to 20 seconds:

admin@Switch# set protocols ospf6 area interface vlan2 vif vlan2 retransmit-interval 20
  • No labels