Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

To configure a filter sequence to match packets based on the destination IPv6 address, use the set firewall filter sequence from destination-address-ipv6 command in L2/L3 configuration mode. To remove the destination IPv6 address, use the delete form of the command.

Command Syntax

set firewall filter filter-name sequence number from destination-address-ipv6 ipv6-address/mask
delete firewall filter filter-name sequence number from destination-address-ipv6

Parameters

filter-nameFilter name.
numberFilter sequence number. The range is 0-9999.
ipv6-address/maskIPv6 address and prefix length.

Example

The following example configures sequence 2 of the MyFilter filter to match packets with IPv6 destination address 2001::1/32:

admin@Switch# set firewall filter MyFilter sequence 2 from destination-address-ipv6 2001::1/128

The following example removes IPv6 destination address 2001::1/32 from sequence 2 of the MyFilter filter:

admin@XorPlus# delete firewall filter MyFilter sequence 2 from destination-address-ipv6
Deleting: 
>   destination-address-ipv6: 2001::1/128
OK 
  • No labels