The set protocols igmp-snooping vlan-id static group interface command configures a static member port to the particular multicast group.
set protocols igmp-snooping vlan-id <vlan-id> static group <group-address> interface <interface-name>
Specifies a VLAN ID. The value is an integer that ranges from 1 to 4094.
Specifies the IP address of a multicast group. The value ranges from 184.108.40.206 to 220.127.116.11 in dotted decimal notation.
Specifies the interface of the switch as a static member interface.
In addition to dynamically establishing a multicast forwarding table through Layer 2 multicast protocols, you can manually configure the Layer 2 multicast forwarding entries to statically bind interfaces to multicast groups. After an interface is statically added to a multicast group, users on the interface can receive multicast data in the multicast group permanently and stably. Static member port will not be affected by the aging time, it will not age.
- Configure a static member interface to the multicast group.