Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
The set firewall filter copp sequence from destination-port command configures a firewall filter rule based on the destination port for traffic classification.
Command Syntax
set firewall filter copp sequence <number> from destination-port <port-number>
Parameter
Parameter | Description |
sequence <number> | Specifies filter sequence number. The value is an integer that ranges from 0 to 9999. The 15 integers 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150 are not allowed to be used for sequence numbers in user-defined CoPP firewall filter rules. |
destination-port <port-number> | Specifies the destination port number. The value is an integer. |
Usage Guidelines
You can run the set firewall filter copp sequence from destination-port command to configure a firewall filter rule based on the destination port for traffic classification so that the device processes packets matching the same firewall filter rule in the same manner.
Example
• Configure a firewall filter rule based on the destination port of 3222.
admin@XorPlus# set firewall filter copp sequence 51 from destination-port 3222 admin@XorPlus# commit