Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
The set firewall filter copp sequence from ether-type command configures a firewall filter rule based on the Ether-Type values for traffic classification.
Command Syntax
set firewall filter copp sequence <number> from ether-type <ether-type>
Parameter
Parameter | Description |
sequence <number> | Specifies filter sequence number. The value is an integer that ranges from 0 to 9999. The 15 integers 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150 are not allowed to be used for sequence numbers in user-defined CoPP firewall filter rules. |
ether-type <ether-type> | Specifies an Ether-Type value. The value is an integer in decimal format that ranges from 1501 to 65535. |
Usage Guidelines
You can run the set firewall filter copp sequence from ether-type command to configure a firewall filter rule based on the Ether-Type for traffic classification so that the device processes packets matching the same firewall filter rule in the same manner.
Example
• Configure a firewall filter rule based on the Ether-Type value 34525.
admin@XorPlus# set firewall filter copp sequence 51 from ether-type 34525 admin@XorPlus# commit