Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
The set firewall filter copp sequence from source-mac-address command configures a firewall filter rule based on the source MAC address for traffic classification.
Command Syntax
set firewall filter copp sequence <number> from source-mac-address <mac-address>
Parameter
Parameter | Description |
sequence <number> | Specifies filter sequence number. The value is an integer that ranges from 0 to 9999. The 15 integers 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150 are not allowed to be used for sequence numbers in user-defined CoPP firewall filter rules. |
destination-mac-address <mac-address> | Specifies the source MAC address. The value is in the format of H:H:H:H:H:H. An H contains 2 hexadecimal numbers. |
Usage Guidelines
You can run the set firewall filter copp sequence from source-mac-address command to configure a firewall filter rule based on the source MAC address for traffic classification so that the device processes packets matching the same firewall filter rule in the same manner.
Example
• Configure a firewall filter rule based on the source MAC address of 11:50:ba:27:be:d2.
admin@XorPlus# set firewall filter copp sequence 51 from source-mac-address 11:50:ba:27:be:d2 admin@XorPlus# commit