Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
To configure a filter sequence to match packets based on the destination IPv6 address, use the set firewall filter sequence from destination-address-ipv6 command in L2/L3 configuration mode. To remove the destination IPv6 address, use the delete form of the command.
set firewall filter filter-name sequence number from destination-address-ipv6 ipv6-address/mask
delete firewall filter filter-name sequence number from destination-address-ipv6
|number||Filter sequence number. The range is 0-9999.|
|ipv6-address/mask||IPv6 address and prefix length.|
The following example configures sequence 2 of the MyFilter filter to match packets with IPv6 destination address 2001::1/32:
admin@Switch# admin@XorPlus# set firewall filter MyFilter sequence 2 from destination-address-ipv6 2001::1/128
The following example removes IPv6 destination address 2001::1/32 from sequence 2 of the MyFilter filter:
admin@XorPlus# delete firewall filter MyFilter sequence 2 from destination-address-ipv6 Deleting: > destination-address-ipv6: 2001::1/128 OK