Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

The set interface gigabit-ethernet family ethernet-switching bpdu-tunneling protocol command enables the BPDU tunneling function of the Layer 2 protocol.

Command Syntax

set interface gigabit-ethernet <port-id> family ethernet-switching bpdu-tunneling protocol <protocol-type>





gigabit-ethernet <port-id>

Specifies switch port identifier.


BPDU Tunneling cannot be configured on a LAG port, or the physical port that belongs to a LAG. When you need to configure BPDU tunneling on the physical port that belongs to a LAG, you need to first take the physical port out of the LAG port before configuration.

protocol <protocol-type>

Specifies the Layer 2 protocol, which needs to be transmitted through BPDU tunnel. The values could be STP or LACP.


• Enable the BPDU tunneling function of STP protocol.

admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching bpdu-tunneling protocol stp
admin@XorPlus# commit
  • No labels