Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

Run the command set protocols ospf interface dead-interval to configure the OSPF neighbor router dead interval in seconds. This value must be the same on all routers in the OSPF domain.

Run the command delete protocols ospf interface dead-interval to remove this configuration and revert to the default value which is 40 seconds.

Command Syntax

set protocols ospf interface <vlan-interfacedead-interval <seconds>

delete protocols ospf interface <vlan-interfacedead-interval 




interface <vlan-interface>

Specifies the name of the interface.

dead-interval <seconds>Specifies the OSPF neighbor dead interval in seconds. The value ranges from 1 to 65535. The default interval is 40 seconds.


  •  Configure the OSPF neighbor dead interval to 60 seconds.
admin@XorPlus# set protocols ospf interface vlan200 dead-interval 60
admin@Xorplus# commit
  • No labels