Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

The set protocols pim rp command statically configures a static RP for a specified multicast group.

Command Syntax

set protocols pim [vrf<vrf-name>] rp <rp-address> [group <group-address>]




vrf <vrf-name>

Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

rp <rp-address>

Specifies the address of the static RP in IPv4 format (x.x.x.x), where x is a decimal number from 0 to

group <group-address>Optional. Specifies the multicast group address in IPv4/prefix-lenghth format.

Usage Guidelines

This command must be configured on all PIM-SM routers in the domain. If group address is not specified, it applies to all IPv4 multicast addresses ( -


  • Configure the router as the RP.
admin@Xorplus# set protocols pim rp
admin@Xorplus# commit
  • No labels