Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

The set system ntp server-ip command configures the IP address of the remote NTP server.

Note: the route between NTP server and NTP source interface is required to be reachable.

Command Syntax

set system ntp server-ip <ipv4-address>




server-ip <ipv4-address>

Specifies the IPv4 address of the remote server. The value is an IPv4 address, e.g.


  • Configure the IP address of the remote NTP server.
admin@XorPlus# set system ntp server-ip
admin@XorPlus# commit 
  • No labels