Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

To configure tunneling for ingress traffic at a port, use the set vlans dot1q-tunneling ingress from double-tag service-vlan command in L2/L3 configuration mode. If a packet has double tags and service vlan is specified, the packet can pass through the port.

Command Syntax

set vlans dot1q-tunneling ingress tunnel-id from double-tag service-vlan vlan-id


tunnel-idTunnel identifier.
vlan-idVLAN identifier. The range is 0-4094.


The following example configures T0 tunneling for ingress traffic. If the packet has double tags and service vlan is 100, it can pass through the port:

admin@Switch# set vlans dot1q-tunneling ingress T0 from double-tag service-vlan 100
  • No labels