Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Bug IDReleaseDescription
126113.7.1Fan Speed on N3132 and N3048
The fan speed on N3048 can not be lower than 7000RPM. On N3132 the fan speed is presented as 0 when execute "run show system fan". Fixed in 3.7.1.
124983.7.1Wrong CPLD Version Number
Invalid number 0x0 is shown in the output of system diagnosis on S5200 and N3132. Fixed in 3.7.1.
124893.7.1ONIE Crash When Install PicOS on S5200
If upgdate ONIE from 3.40.1.1-4 or 3.40.1.1-5 to 3.40.1.1-6, after PICOS installation, ONIE boot in grub menu is damaged. And cann't go into ONIE. Fixed in 3.7.1.
125143.7.1ONIE Installation Fails with ECC Error
After install PICOS on N3048 under ONIE, PICOS cannot boot up by prompting ECC error. Fixed in 3.7.1.

Linux Platform

Bug ID

Release

Description

128393.7.2.2

I/O Error Messages During PICOS Installation and Upgrade on Dell Platforms

Linux command ‘partprobe’ is used to inform the kernel of partition table changes during PICOS installation and upgrade. On Dell N32XX and N22XX switch models, a restricted memory block is accessed by this command. That will print the error messages as following:

[29962.202703] print_req_error: I/O error, dev mmcblk0rpmb, sector 0
Warning: Error fsyncing/closing /dev/mmcblk0rpmb: Input/output error

PICOS installation and upgrade will not be affected by this error message. This issue is planed to be fixed in 3.7.3. 

AmpCon

Bug ID

Release

Description

125693.7.1

Roll Back Config if Upgrade Fails
The AmpCon agent will roll back to the original configuration if upgrade fails in case such as vpn connection failure.

...