Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
PICOS-4.1_Configuration_Guide
Page tree

Versions Compared

Old Version 1

changes.mady.by.user Docs Team

Saved on

compared with

New Version Current

changes.mady.by.user Docs Team

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

set firewall filter copp sequence <number> from source-address-ipv6 <ipv6-address>


Parameter

Parameter

Description

sequence <number>

Specifies filter sequence number. The value is an integer that ranges from 0 to 9999.

The 15 integers 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150 are not allowed to be used for sequence numbers in user-defined CoPP firewall filter rules.

source-address-ipv6 <ipv6-address>

Specifies source IPv6, it could be a specific IPv6 address or an IPv6 subnet. The value is a 32-digit hexadecimal number, in the format X:X:X:X:X:X:X:X, an X contains 4 hexadecimal numbers. For example, aa00:1002::1, 2001::1/128.

 


Usage Guidelines

You can run the set firewall filter copp sequence from source-address-ipv6 command to configure a firewall filter rule based on the source IPv6 address for traffic classification so that the device processes packets matching the same firewall filter rule in the same manner. 


Example

•  Configure a firewall filter rule based on the source IPv6 address of 2001:a100::1/32128.

Code Block
admin@XorPlus# set firewall filter copp sequence 51 from source-address-ipv6 2001:a100::1/32128
admin@XorPlus# commit