Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree

Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.

Run the command set protocols ospf6 area stub to configure a stub area for the OSPFv3 instance. Use the optional parameter vrf to specify the VRF for the OSPFv3 instance. If VRF is not specified then the command takes effect for OSPFv3 instance in the default VRF. 

Run the command delete protocols ospf6 area stub to delete this configuration from the switch.


Command Syntax

set protocols ospf6 [vrf <vrf-name>] area {<ipv4>|<area-id>} stub

delete protocols ospf6 [vrf <vrf-name>] area {<ipv4>|<area-id>} stub


vrf <vrf-name>Optional. Specifies the VRF name.
area {<ipv4>|<area-id>}Specifies the area ID for the OSPFv3 instance. The value is either in IPv4 dotted decimal format or an integer ranging from 0 to 4294967295.


  • This example configures area as a stub area of the OSPFv3 instance in the default VRF.